Robotic-The Software Installation

Yesterday I installed the softwares for PIC and Tektronix into Dell Optiplex USBproject desktop PC in the R&D room.

As for the PIC two softwares are installed. The first one is the Micro Code IDE while the second one is the MPLAB. These two softwares are basically needed to program the PIC microcontroller chip as well as to burn it onto the IC.

Meanwhile the Tekonix software is the one that come along with the oscilloscope TDS2002B. This software interacts through USB port between scope and PC where we can view and play around with the measurement done by the scoope. Here are the snapshots of the test that I have been doing yesterday.


This is the snapshot for both channels using builtin 5v square wave test signal with 1000us period. The file can be downloaded at http://www.gigafiles.co.uk/files/4310/USBproject/tektronix/TEK0001.BMP


This is the snapshot for both channels using builtin 5v square wave test signal with 500us period. The file can be downloaded at http://www.gigafiles.co.uk/files/4310/USBproject/tektronix/TEK0002.BMP


This is the snapshot for both channels using builtin 5v square wave test signal at 900ns Rise Time. The file can be downloaded at http://www.gigafiles.co.uk/files/4310/USBproject/tektronix/TEK0003.BMP


This is the snapshot for both channels using builtin 5v square wave test signal at 930ns Fall Time. The file can be downloaded at http://www.gigafiles.co.uk/files/4310/USBproject/tektronix/TEK0004.BMP


This is the snapshot for channel2 using builtin 5v square wave test signal at 1ms period. The file can be downloaded at
http://www.gigafiles.co.uk/files/4310/USBproject/tektronix/TEK0000.BMP