ICTS-PLC Programming

I managed to complete the PLC programming today. Here are the data that I use.

Input Channel Port Common Adderess
0 0 to 8 Com0 0.00, ..., 0.08

Output Channel Port Common Adderess
10 4 to 7 Com3 10.04, ...,10.07

I connected 9 points for inputs and 4 point for outputs. As conveyor3 program, sensor 4 and sensor 6 wont be use. Thus adderess 0.03 and adderess 0.05 are free eventhough the inputs are connected to the PLC. Perhaps they can be used for input upgrade in future.

Everything work perfectly except one. Once the power is off, the PLC goes to STANDBY mode if the power is turn back ON. Maybe I miss out one part probably the protetction option in programming. It's OK since it is being tested in lab only for the time being. Later on when the mounting for the panel is ready in packaging, this issue should be resolve soon.