ICTS-PLC Control Panel Box

Went to Pasar Road on Friday to buy accessories and components for PLC control box. Some of the acessories are anot available which means I have to seek somewhere else such as wire trunking, bigger drill bits, files etc.
The control panel was designed in such a way that it will be placed underneath the conveyor B. As such a holder need to be fabricated for it to be rest there. The reason it is chosen to be placed there is for future layout change. Any layout later on wont affect the external wiring because all parts and wiring are installed on the conveyors themselves.
The front panel is meant for components display and the rear panel is for input output connectors. There is only one AC switch being installed infront of the panel. The rest of the control is done by the PLC itself. The only external switch are START STOP and EMERGENCY where they are fitted in the wired switch box closed to the packaging control panel and operator input mooncake. This is the sketch of how the panel box would looks like.
Anyway, now the task to make holes for components assembly on the control box have been passed to Mr Eluis. Meanwhile a few items must be done to complete the project by middle of this month such as.
1- Stainless Steel Stepper to cross over the conveyor. (Mr Khow & Mr Eluis)
2- Control panel holder.
3- Small mooncake guide attachment.
4- PLC ladder diagram
5- Small mooncake slider attachment
6- 125mm pusher holder.