The USB Tester Board Part 3

Today I completed the other half of the 40P for 2nd USB of the dual USB tester board. However, I havent fully check the wiring whether there is any short circuit or not. Its pretty tiring doing the soldering of tiny components after half day doing it. Anyway, with this acomplishment, then the next stage is to test all of the done hardwares for USB. But of course I have to double check the wiring prior to turning on the devices.

As for Futurelec, the PCI card had been successfully installed. One thing that hinders progress for the time being is the interface board to do testing. While it requires some hardware design, it also need some hardware fabrication. I think it will take some time to do that. So for the time being, I guess I wil concentrate more on the USB board first.